Description
DX30 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
$19.25 ea.
Denitool WCGT 1.211 sized positive carbide turning insert with a honed cutting edge and maximum depth of cut (DOC) of 0.01” (0.3 mm). The WCGT 020104 EN DX30 insert has a carbide substrate. It is PVD coated with our DX30 grade. It’s the best choice to cut in steel. It’s well suited to cut cast iron. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
In stock
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
Weight | 0.0009 lbs |
---|---|
Dimensions | 2.7 × 1 × 0.4 in |
FirstChoiceToolItem | |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | PVD |
CBMD | B10H |
LBB | 0.016” (0.40 mm) |
AN | 7.0° |
RE | 0.016” (0.40 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.051” (1.30 mm) |
L | 0.107” (2.72 mm) |
APMX | 0.012” (0.30 mm) |
D1 | 0.087” (2.20 mm) |
HAND | |
IC | 0.156” (3.97 mm) |
EPSR | 80.0° |
IIC | WC0201 |
GAN | 10.0° |
S (insert thickness) | 0.063” (1.59 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa) |