Name: WCET 020102 FN-20 DX52
SKU: WCET 020102 FN-20 DX52
Price: 28.72 USD
Availability: InStock

WCET 020102 FN-20 DX52

$28.72 ea.

Denitool WCET 1.210.5 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.01” (0.3 mm). The WCET 020102 FN-20 DX52 insert has a carbide substrate. It is PVD+PLC coated with our DX52 grade. It’s well suited to cut in steel. It’s the best choice to cut in stainless steel. It’s well suited to cut non-ferrous materials. It’s well suited to cut super alloys. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.

In stock

SKU: WCET 020102 FN-20 DX52 Category: WCET 0201.. FN-20 Tag: WC0201

Description

DX52 Grade

Similar to DX 50 but with additional PLC-antifriction film against the cold-welding tendency. High thermal stability.

Additional information

Weight	0.0009 lbs
Dimensions	2.7 × 1 × 0.4 in
FirstChoiceToolItem	first choice
ANSI SIZE	WCET 1.210.5
SUBSTRATE	Carbide
Grade	DX52
COATING	PVD+PLC
CBMD	Z20G
LBB	0.059” (1.50 mm)
AN	7.0°
RE	0.008” (0.20 mm)
REN	0.000” (0.00 mm)
LE	0.043” (1.10 mm)
L	0.107” (2.72 mm)
APMX	0.012” (0.30 mm)
D1	0.087” (2.20 mm)
HAND	neutral
IC	0.156” (3.97 mm)
EPSR	80.0°
IIC	WC0201
GAN	20.0°
S (insert thickness)	0.063” (1.59 mm)
Capability	P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%), N3 – Aluminum Alloys (Si > 12.2%), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP, S1 – Iron-Based – Heat-Resistant Alloys (Rm 500-1200 MPa – Hardness 160-260 HB / 25-48 HRC), S2 – Cobalt-Based – Heat-Resistant Alloys (Rm 1000-1450 MPa – Hardness 250-450 HB / 25-48 HRC), S3 – Nickel-Based – Heat-Resistant Alloys (Rm 600-1700 MPa – Hardness 160-450 HB / < 48 HRC), S4 – Titanium and Titanium-based Alloys (Rm 900-1600 MPa – Hardness 300-400 HB / 33-48 HRC)

WCET 020102 FN-20 DX52

Description

DX52 Grade

Additional information

Related products

WCET 020104 FN-20 DX50

WCGT 020102 FN-20 DX30

WCGW 0201005 FN DT355