Description
P25 Grade
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
$18.64 ea.
Denitool TPHW 21.51 sized neutral carbide turning and milling insert with a honed cutting edge and maximum depth of cut (DOC) of 0.12” (3 mm). The TPHW 110204 EN P25 insert has a carbide substrate. It is uncoated. It’s well suited to cut in steel. Minimum order quantity: 10 pcs.
In stock
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
Weight | 0.0044 lbs |
---|---|
Dimensions | 3.5 × 1.5 × 0.4 in |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | uncoated |
CBMD | X00H |
LBB | 0.000” (0.00 mm) |
AN | 11.0° |
RE | 0.016” (0.40 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.433” (11.00 mm) |
L | 0.433” (11.00 mm) |
APMX | 0.118” (3.00 mm) |
D1 | 0.110” (2.80 mm) |
HAND | |
IC | 0.250” (6.35 mm) |
EPSR | 60.0° |
IIC | TP1102 |
GAN | 0.0° |
S (insert thickness) | 0.094” (2.38 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%) |