Description
DX50 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at high cutting speed. High thermal stability. Excellent for dry machining.
TPHW 110208 FN DX50
$28.99 ea.
Denitool TPHW 21.52 sized neutral carbide turning and milling insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.12” (3 mm). The TPHW 110208 FN DX50 insert has a carbide substrate. It is PVD coated with our DX50 grade. It’s the best choice to cut in steel. It’s the best choice to cut cast iron. It’s well suited to cut non-ferrous materials. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.0044 lbs |
|---|---|
| Dimensions | 3.5 × 1.5 × 0.4 in |
| FirstChoiceToolItem | |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | X00G |
| LBB | 0.000” (0.00 mm) |
| AN | 11.0° |
| RE | 0.031” (0.80 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.433” (11.00 mm) |
| L | 0.433” (11.00 mm) |
| APMX | 0.118” (3.00 mm) |
| D1 | 0.110” (2.80 mm) |
| HAND | |
| IC | 0.250” (6.35 mm) |
| EPSR | 60.0° |
| IIC | TP1102 |
| GAN | 0.0° |
| S (insert thickness) | 0.094” (2.38 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |
Related products
-
TPHW 110208 EN P25
$19.36 ea. Add to cartIn Stock -
TPHW 110208 FN DX20
$22.85 ea. Read moreOut of Stock -
TPHW 110208 EN DP55
$28.99 ea. Add to cartIn Stock
