Description
DT55 Grade
For finishing applications in steel and free-cutting stainless steel at medium cutting speed.
CPGW 05T100 FL DT55
$13.83 ea.
Denitool CPGW 1.81.2 sized neutral cermet turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.12” (3 mm). The CPGW 05T100 FL DT55 insert has a cermet substrate. It is uncoated. It’s well suited to cut in steel. It’s well suited to cut cast iron. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.0022 lbs |
|---|---|
| Dimensions | 3.5 × 1.5 × 0.4 in |
| FirstChoiceToolItem | |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | uncoated |
| CBMD | X00GW |
| LBB | 0.000” (0.00 mm) |
| AN | 11.0° |
| RE | 0.000” (0.00 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.205” (5.20 mm) |
| L | 0.222” (5.65 mm) |
| APMX | 0.118” (3.00 mm) |
| D1 | 0.098” (2.50 mm) |
| HAND | |
| IC | 0.219” (5.56 mm) |
| EPSR | 80.0° |
| IIC | CP05T1 |
| GAN | 0.0° |
| S (insert thickness) | 0.078” (1.97 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N5 – Carbon – Graphite Composites – CFRP |
Related products
-
CPGW 05T104 FN DX30
$22.38 ea. Read moreOut of Stock -
CPGW 05T104 FN DX20
$21.39 ea. Read moreOut of Stock -
CPGW 05T104 PKD
$114.56 ea. Add to cartIn Stock
