Description
DX30 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
$22.38 ea.
Denitool CPGW 1.81.21 sized neutral carbide turning and milling insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.12” (3 mm). The CPGW 05T104 FN DX30 insert has a carbide substrate. It is PVD coated with our DX30 grade. It’s the best choice to cut cast iron. It’s well suited to cut non-ferrous materials. Minimum order quantity: 10 pcs.
Out of stock
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
Weight | 0.0022 lbs |
---|---|
Dimensions | 3.5 × 1.5 × 0.4 in |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | PVD |
CBMD | X00G |
LBB | 0.000” (0.00 mm) |
AN | 11.0° |
RE | 0.016” (0.40 mm) |
REN | 0.016” (0.40 mm) |
LE | 0.220” (5.60 mm) |
L | 0.222” (5.65 mm) |
APMX | 0.118” (3.00 mm) |
D1 | 0.098” (2.50 mm) |
HAND | |
IC | 0.219” (5.56 mm) |
EPSR | 80.0° |
IIC | CP05T1 |
GAN | 0.0° |
S (insert thickness) | 0.078” (1.97 mm) |
Capability | P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |