Description
DX2 Grade
Micrograin grade for machining of cast iron, plastics, and aluminum. Stainless steel at lower cutting speed.
CPGT 05T102 FN DX2
$16.65 ea.
Denitool CPGT 1.81.20.5 sized positive carbide turning and milling insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.1” (2.5 mm). The CPGT 05T102 FN DX2 insert has a carbide substrate. It is uncoated. It’s well suited to cut cast iron. It’s well suited to cut non-ferrous materials. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.0022 lbs |
|---|---|
| Dimensions | 3.5 × 1.5 × 0.4 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | uncoated |
| CBMD | B10M |
| LBB | 0.031” (0.80 mm) |
| AN | 11.0° |
| RE | 0.008” (0.20 mm) |
| REN | 0.008” (0.20 mm) |
| LE | 0.220” (5.60 mm) |
| L | 0.222” (5.65 mm) |
| APMX | 0.098” (2.50 mm) |
| D1 | 0.098” (2.50 mm) |
| HAND | |
| IC | 0.219” (5.56 mm) |
| EPSR | 80.0° |
| IIC | CP05T1 |
| GAN | 10.0° |
| S (insert thickness) | 0.078” (1.97 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |
Related products
-
CPGW 05T104 FN DX50
$24.21 ea. Add to cartIn Stock -
CPGW 05T104 FN DX2
$18.02 ea. Add to cartIn Stock -
CPGW 05T104 FN DX20
$21.39 ea. Read moreOut of Stock
