Description
DT355 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
$23.27 ea.
Denitool WCGT 1.211 sized positive cermet turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.015” (0.4 mm). The WCGT 020104 FN DT355 insert has a cermet substrate. It is PVD coated with our DT355 grade. It’s the best choice to cut in steel. It’s the best choice to cut in stainless steel. It’s the best choice to cut non-ferrous materials. Minimum order quantity: 10 pcs.
Out of stock
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
Weight | 0.0009 lbs |
---|---|
Dimensions | 2.7 × 1 × 0.4 in |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | PVD |
CBMD | Z15G |
LBB | 0.055” (1.40 mm) |
AN | 7.0° |
RE | 0.016” (0.40 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.055” (1.40 mm) |
L | 0.107” (2.72 mm) |
APMX | 0.016” (0.40 mm) |
D1 | 0.087” (2.20 mm) |
HAND | |
IC | 0.156” (3.97 mm) |
EPSR | 80.0° |
IIC | WC0201 |
GAN | 15.0° |
S (insert thickness) | 0.063” (1.59 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N5 – Carbon – Graphite Composites – CFRP |