Description
DX50 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at high cutting speed. High thermal stability. Excellent for dry machining.
WCGT 020102 EN DX50
$21.04 ea.
Denitool WCGT 1.210.5 sized positive carbide turning insert with a honed cutting edge and maximum depth of cut (DOC) of 0.01” (0.3 mm). The WCGT 020102 EN DX50 insert has a carbide substrate. It is PVD coated with our DX50 grade. It’s the best choice to cut in steel. It’s well suited to cut cast iron. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.0009 lbs |
|---|---|
| Dimensions | 2.7 × 1 × 0.4 in |
| FirstChoiceToolItem | |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | B10H |
| LBB | 0.016” (0.40 mm) |
| AN | 7.0° |
| RE | 0.008” (0.20 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.053” (1.35 mm) |
| L | 0.107” (2.72 mm) |
| APMX | 0.012” (0.30 mm) |
| D1 | 0.087” (2.20 mm) |
| HAND | |
| IC | 0.156” (3.97 mm) |
| EPSR | 80.0° |
| IIC | WC0201 |
| GAN | 10.0° |
| S (insert thickness) | 0.063” (1.59 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa) |
Related products
-
WCGT 020104 FR DX50
$28.12 ea. Read moreOut of Stock -
WCGT 020104 FR DX2
$22.16 ea. Add to cartIn Stock -
WCGW 0201005 FN DT55
$22.61 ea. Add to cartIn Stock
