Description
DX30 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
VCGW 130308 DX30
$25.87 ea.
Denitool VCGW 2.522 sized neutral carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.155” (4 mm). The VCGW 130308 DX30 insert has a carbide substrate. It is PVD coated with our DX30 grade. It’s the best choice to cut cast iron. It’s well suited to cut non-ferrous materials. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.011 lbs |
|---|---|
| Dimensions | 4.6 × 2 × 0.5 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | X00G |
| LBB | 0.000” (0.00 mm) |
| AN | 7.0° |
| RE | 0.031” (0.80 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.476” (12.10 mm) |
| L | 0.545” (13.84 mm) |
| APMX | 0.157” (4.00 mm) |
| D1 | 0.134” (3.40 mm) |
| HAND | |
| IC | 0.313” (7.94 mm) |
| EPSR | 35.0° |
| IIC | VC1303 |
| GAN | 0.0° |
| S (insert thickness) | 0.125” (3.18 mm) |
| Capability | P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |
Related products
-
VCGW 130308 CBN
$105.38 ea. Add to cartIn Stock -
VCGW 130308 DX50
$28.97 ea. Add to cartIn Stock -
VCGW 130304 PKD
$149.00 ea. Add to cartIn Stock
