Description
DX2 Grade
Micrograin grade for machining of cast iron, plastics, and aluminum. Stainless steel at lower cutting speed.
VCGT 130308 FR-15 DX2
$22.49 ea.
Denitool VCGT 2.522 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.275” (7 mm). The VCGT 130308 FR-15 DX2 insert has a carbide substrate. It is uncoated. It’s well suited to cut in steel. It’s well suited to cut non-ferrous materials. Minimum order quantity: 10 pcs.
Out of stock
Additional information
| Weight | 0.011 lbs |
|---|---|
| Dimensions | 4.6 × 2 × 0.5 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | uncoated |
| CBMD | Z12G |
| LBB | 0.059” (1.50 mm) |
| AN | 7.0° |
| RE | 0.031” (0.80 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.476” (12.10 mm) |
| L | 0.545” (13.84 mm) |
| APMX | 0.276” (7.00 mm) |
| D1 | 0.134” (3.40 mm) |
| HAND | |
| IC | 0.313” (7.94 mm) |
| EPSR | 35.0° |
| IIC | VC1303 |
| GAN | 12.0° |
| S (insert thickness) | 0.125” (3.18 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |
Related products
-
VCGW 130302 DX50
$27.84 ea. Read moreOut of Stock -
VCGW 130308 DX50
$28.97 ea. Read moreOut of Stock -
VCGW 130302 CBN
$105.38 ea. Read moreOut of Stock
