Description
DX52 Grade
Similar to DX 50 but with additional PLC-antifriction film against the cold-welding tendency. High thermal stability.
$28.07 ea.
Denitool VCGT 2.522 sized positive carbide turning insert with a honed cutting edge and maximum depth of cut (DOC) of 0.12” (3 mm). The VCGT 130308 DX52 insert has a carbide substrate. It is PVD+PLC coated with our DX52 grade. It’s the best choice to cut in steel. It’s well suited to cut in stainless steel. It’s well suited to cut cast iron. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
Out of stock
Similar to DX 50 but with additional PLC-antifriction film against the cold-welding tendency. High thermal stability.
Weight | 0.011 lbs |
---|---|
Dimensions | 4.6 × 2 × 0.5 in |
FirstChoiceToolItem | |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | PVD+PLC |
CBMD | B12H |
LBB | 0.059” (1.50 mm) |
AN | 7.0° |
RE | 0.031” (0.80 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.331” (8.40 mm) |
L | 0.545” (13.84 mm) |
APMX | 0.118” (3.00 mm) |
D1 | 0.134” (3.40 mm) |
HAND | |
IC | 0.313” (7.94 mm) |
EPSR | 35.0° |
IIC | VC1303 |
GAN | 12.0° |
S (insert thickness) | 0.125” (3.18 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |