Description
DC15 Grade
Micrograin grade for machining of steel, stainless steel, cast iron steel, and nodular cast iron. Good stability of cutting edge and resistance against crater-wear.
$20.76 ea.
Denitool VCGT 2.522 sized positive carbide turning insert with a honed cutting edge and maximum depth of cut (DOC) of 0.12” (3 mm). The VCGT 130308 DC15 insert has a carbide substrate. It is CVD coated with our DC15 grade. It’s the best choice to cut in steel. It’s the best choice to cut cast iron. It’s well suited to cut non-ferrous materials. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
In stock
Micrograin grade for machining of steel, stainless steel, cast iron steel, and nodular cast iron. Good stability of cutting edge and resistance against crater-wear.
Weight | 0.011 lbs |
---|---|
Dimensions | 4.6 × 2 × 0.5 in |
FirstChoiceToolItem | |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | CVD |
CBMD | B12H |
LBB | 0.059” (1.50 mm) |
AN | 7.0° |
RE | 0.031” (0.80 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.331” (8.40 mm) |
L | 0.545” (13.84 mm) |
APMX | 0.118” (3.00 mm) |
D1 | 0.134” (3.40 mm) |
HAND | |
IC | 0.313” (7.94 mm) |
EPSR | 35.0° |
IIC | VC1303 |
GAN | 12.0° |
S (insert thickness) | 0.125” (3.18 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa) |