Description
DC15 Grade
Micrograin grade for machining of steel, stainless steel, cast iron steel, and nodular cast iron. Good stability of cutting edge and resistance against crater-wear.
VCGT 130308-25 DC15
$20.76 ea.
Denitool VCGT 2.522 sized positive carbide turning insert with a honed cutting edge and maximum depth of cut (DOC) of 0.155” (4 mm). The VCGT 130308-25 DC15 insert has a carbide substrate. It is CVD coated with our DC15 grade. It’s the best choice to cut in steel. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.011 lbs |
|---|---|
| Dimensions | 4.6 × 2 × 0.5 in |
| FirstChoiceToolItem | |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | CVD |
| CBMD | C25H |
| LBB | 0.000” (0.00 mm) |
| AN | 7.0° |
| RE | 0.031” (0.80 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.476” (12.10 mm) |
| L | 0.545” (13.84 mm) |
| APMX | 0.157” (4.00 mm) |
| D1 | 0.134” (3.40 mm) |
| HAND | |
| IC | 0.313” (7.94 mm) |
| EPSR | 35.0° |
| IIC | VC1303 |
| GAN | 25.0° |
| S (insert thickness) | 0.125” (3.18 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%) |
Related products
-
VCGW 130308 DX20
$24.15 ea. Read moreOut of Stock -
VCGW 130308 DX30
$25.87 ea. Add to cartIn Stock -
VCGW 130308 DX50
$28.97 ea. Add to cartIn Stock
