Description
DX50 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at high cutting speed. High thermal stability. Excellent for dry machining.
$27.17 ea.
Denitool VCGT 2.520.5 sized positive carbide turning insert with a honed cutting edge and maximum depth of cut (DOC) of 0.08” (2 mm). The VCGT 130302 DX50 insert has a carbide substrate. It is PVD coated with our DX50 grade. It’s the best choice to cut in steel. It’s well suited to cut cast iron. Minimum order quantity: 10 pcs.
In stock
For steel, difficult to machine stainless steel, gray and nodular cast iron at high cutting speed. High thermal stability. Excellent for dry machining.
Weight | 0.011 lbs |
---|---|
Dimensions | 4.6 × 2 × 0.5 in |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | PVD |
CBMD | B12H |
LBB | 0.059” (1.50 mm) |
AN | 7.0° |
RE | 0.008” (0.20 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.382” (9.70 mm) |
L | 0.545” (13.84 mm) |
APMX | 0.079” (2.00 mm) |
D1 | 0.134” (3.40 mm) |
HAND | |
IC | 0.313” (7.94 mm) |
EPSR | 35.0° |
IIC | VC1303 |
GAN | 12.0° |
S (insert thickness) | 0.125” (3.18 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |