Description
DX2 Grade
Micrograin grade for machining of cast iron, plastics, and aluminum. Stainless steel at lower cutting speed.
VCGT 070204 FN-18M DX2
$17.83 ea.
Denitool VCGT 1.21.51 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.12” (3 mm). The VCGT 070204 FN-18M DX2 insert has a carbide substrate. It is uncoated. It’s the best choice to cut non-ferrous materials. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.0022 lbs |
|---|---|
| Dimensions | 2.7 × 1 × 0.4 in |
| FirstChoiceToolItem | |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | uncoated |
| CBMD | B18M |
| LBB | 0.028” (0.70 mm) |
| AN | 7.0° |
| RE | 0.016” (0.40 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.236” (6.00 mm) |
| L | 0.272” (6.92 mm) |
| APMX | 0.118” (3.00 mm) |
| D1 | 0.091” (2.30 mm) |
| HAND | |
| IC | 0.156” (3.97 mm) |
| EPSR | 35.0° |
| IIC | VC0702 |
| GAN | 18.0° |
| S (insert thickness) | 0.094” (2.38 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP, S4 – Titanium and Titanium-based Alloys (Rm 900-1600 MPa – Hardness 300-400 HB / 33-48 HRC) |
Related products
-
VCGW 070201 DX2
$16.81 ea. Add to cartIn Stock -
VCGW 070200 FR DX20
$23.52 ea. Add to cartIn Stock -
VCGW 070201 DX20
$20.19 ea. Add to cartIn Stock
