Description
DX30 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
VCGT 070204-12 DX30
$18.69 ea.
Denitool VCGT 1.21.51 sized positive carbide turning and milling insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.06” (1.5 mm). The VCGT 070204-12 DX30 insert has a carbide substrate. It is PVD coated with our DX30 grade. It’s the best choice to cut in steel. It’s well suited to cut in stainless steel. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.0022 lbs |
|---|---|
| Dimensions | 2.7 × 1 × 0.4 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | B12S |
| LBB | 0.016” (0.40 mm) |
| AN | 7.0° |
| RE | 0.016” (0.40 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.169” (4.30 mm) |
| L | 0.272” (6.92 mm) |
| APMX | 0.059” (1.50 mm) |
| D1 | 0.091” (2.30 mm) |
| HAND | |
| IC | 0.156” (3.97 mm) |
| EPSR | 35.0° |
| IIC | VC0702 |
| GAN | 12.0° |
| S (insert thickness) | 0.094” (2.38 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |
Related products
-
VCGW 070204 PKD
$127.49 ea. Add to cartIn Stock -
VCGW 070204 CBN
$100.22 ea. Add to cartIn Stock -
VCGW 070204 DX20
$19.38 ea. Add to cartIn Stock
