Description
DP25 Grade
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
$31.32 ea.
Denitool TPHT 32.52 sized positive carbide turning and milling insert with a honed cutting edge and maximum depth of cut (DOC) of 0.315” (8 mm). The TPHT 16T308 ER DP25 insert has a carbide substrate. It is PVD coated with our DP25 grade. It’s the best choice to cut in steel. It’s well suited to cut in stainless steel. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
In stock
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
Weight | 0.0132 lbs |
---|---|
Dimensions | 4.6 × 2 × 0.5 in |
FirstChoiceToolItem | |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | PVD |
CBMD | Z15H |
LBB | 0.098” (2.50 mm) |
AN | 11.0° |
RE | 0.031” (0.80 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.421” (10.70 mm) |
L | 0.649” (16.49 mm) |
APMX | 0.315” (8.00 mm) |
D1 | 0.173” (4.40 mm) |
HAND | |
IC | 0.375” (9.52 mm) |
EPSR | 60.0° |
IIC | TP16T3 |
GAN | 15.0° |
S (insert thickness) | 0.156” (3.97 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa) |