Description
DX2 Grade
Micrograin grade for machining of cast iron, plastics, and aluminum. Stainless steel at lower cutting speed.
$23.25 ea.
Denitool GCGT 10.80.2 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.02” (0.5 mm). The GCGT 04T001-20 DX2 insert has a carbide substrate. It is uncoated. It’s the best choice to cut non-ferrous materials. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
In stock
Micrograin grade for machining of cast iron, plastics, and aluminum. Stainless steel at lower cutting speed.
Weight | 0.0007 lbs |
---|---|
Dimensions | 2.7 × 1 × 0.4 in |
FirstChoiceToolItem | |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | uncoated |
CBMD | B20M |
LBB | 0.016” (0.40 mm) |
AN | 7.0° |
RE | 0.004” (0.10 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.173” (4.40 mm) |
L | 0.173” (4.38 mm) |
APMX | 0.020” (0.50 mm) |
D1 | 0.067” (1.70 mm) |
HAND | |
IC | 0.122” (3.10 mm) |
EPSR | 45.0° |
IIC | GC04T0 |
GAN | 20.0° |
S (insert thickness) | 0.047” (1.20 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP, S4 – Titanium and Titanium-based Alloys (Rm 900-1600 MPa – Hardness 300-400 HB / 33-48 HRC) |