Description
DT355 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
EPGT 050204 EN DT355
$19.05 ea.
Denitool EPGT 1.81.51 sized positive cermet turning insert with a honed cutting edge and maximum depth of cut (DOC) of 0.1” (2.5 mm). The EPGT 050204 EN DT355 insert has a cermet substrate. It is PVD coated with our DT355 grade. It’s the best choice to cut in steel. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.0022 lbs |
|---|---|
| Dimensions | 3.5 × 1.5 × 0.4 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | B12H |
| LBB | 0.031” (0.80 mm) |
| AN | 11.0° |
| RE | 0.016” (0.40 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.177” (4.50 mm) |
| L | 0.227” (5.76 mm) |
| APMX | 0.098” (2.50 mm) |
| D1 | 0.098” (2.50 mm) |
| HAND | |
| IC | 0.219” (5.56 mm) |
| EPSR | 75.0° |
| IIC | EP0502 |
| GAN | 12.0° |
| S (insert thickness) | 0.094” (2.38 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa) |
Related products
-
EPGT 050204 FR-10 DX20
$21.26 ea. Read moreOut of Stock -
EPMW 050204 PKD
$118.26 ea. Add to cartIn Stock -
EPGT 050204 FR DT255
$23.06 ea. Read moreOut of Stock
