Description
DX20 Grade
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
EPGT 050202 FL-10 DX20
$22.85 ea.
Denitool EPGT 1.81.50.5 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.1” (2.5 mm). The EPGT 050202 FL-10 DX20 insert has a carbide substrate. It is PVD coated with our DX20 grade. It’s well suited to cut in steel. It’s well suited to cut cast iron. It’s well suited to cut non-ferrous materials. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.0022 lbs |
|---|---|
| Dimensions | 3.5 × 1.5 × 0.4 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | Z12G |
| LBB | 0.026” (0.65 mm) |
| AN | 11.0° |
| RE | 0.008” (0.20 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.177” (4.50 mm) |
| L | 0.227” (5.76 mm) |
| APMX | 0.098” (2.50 mm) |
| D1 | 0.098” (2.50 mm) |
| HAND | |
| IC | 0.219” (5.56 mm) |
| EPSR | 75.0° |
| IIC | EP0502 |
| GAN | 12.0° |
| S (insert thickness) | 0.094” (2.38 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |
Related products
-
EPGT 050204 FL-10 DX2
$18.03 ea. Add to cartIn Stock -
EPGT 050204 EN DT355
$20.48 ea. Add to cartIn Stock -
EPGT 050204 EN DX2
$12.21 ea. Add to cartIn Stock
