Description
DX2 Grade
Micrograin grade for machining of cast iron, plastics, and aluminum. Stainless steel at lower cutting speed.
EPGT 050204 FL-10 DX2
$16.77 ea.
Denitool EPGT 1.81.51 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.1” (2.5 mm). The EPGT 050204 FL-10 DX2 insert has a carbide substrate. It is uncoated. It’s well suited to cut non-ferrous materials. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.0022 lbs |
|---|---|
| Dimensions | 3.5 × 1.5 × 0.4 in |
| FirstChoiceToolItem | |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | uncoated |
| CBMD | Z12G |
| LBB | 0.026” (0.65 mm) |
| AN | 11.0° |
| RE | 0.016” (0.40 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.185” (4.70 mm) |
| L | 0.227” (5.76 mm) |
| APMX | 0.098” (2.50 mm) |
| D1 | 0.098” (2.50 mm) |
| HAND | |
| IC | 0.219” (5.56 mm) |
| EPSR | 75.0° |
| IIC | EP0502 |
| GAN | 12.0° |
| S (insert thickness) | 0.094” (2.38 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |
Related products
-
EPGT 050204 FR-10 DX30
$22.66 ea. Read moreOut of Stock -
EPGT 050204 FR-10 DX20
$21.26 ea. Read moreOut of Stock -
EPGT 050204 FR DT255
$23.06 ea. Read moreOut of Stock
