Description
DX20 Grade
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
CPGT 05T104 FN DX20
$19.93 ea.
Denitool CPGT 1.81.21 sized positive carbide turning and milling insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.1” (2.5 mm). The CPGT 05T104 FN DX20 insert has a carbide substrate. It is PVD coated with our DX20 grade. It’s the best choice to cut in steel. It’s well suited to cut in stainless steel. It’s well suited to cut cast iron. It’s well suited to cut non-ferrous materials. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.0022 lbs |
|---|---|
| Dimensions | 3.5 × 1.5 × 0.4 in |
| FirstChoiceToolItem | |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | B10M |
| LBB | 0.031” (0.80 mm) |
| AN | 11.0° |
| RE | 0.016” (0.40 mm) |
| REN | 0.016” (0.40 mm) |
| LE | 0.220” (5.60 mm) |
| L | 0.222” (5.65 mm) |
| APMX | 0.098” (2.50 mm) |
| D1 | 0.098” (2.50 mm) |
| HAND | |
| IC | 0.219” (5.56 mm) |
| EPSR | 80.0° |
| IIC | CP05T1 |
| GAN | 10.0° |
| S (insert thickness) | 0.078” (1.97 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |
Related products
-
CPGW 05T104 FN DX20
$21.39 ea. Read moreOut of Stock -
CPGW 05T104 FN DX50
$24.21 ea. Add to cartIn Stock -
CPGW 05T104 FN DX2
$18.02 ea. Add to cartIn Stock
