Description
DX50 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at high cutting speed. High thermal stability. Excellent for dry machining.
$26.27 ea.
Denitool CPET 1.81.21 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.015” (0.4 mm). The CPET 05T104 FN-20 DX50 insert has a carbide substrate. It is PVD coated with our DX50 grade. It’s the best choice to cut in steel. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
Out of stock
For steel, difficult to machine stainless steel, gray and nodular cast iron at high cutting speed. High thermal stability. Excellent for dry machining.
Weight | 0.0022 lbs |
---|---|
Dimensions | 3.5 × 1.5 × 0.4 in |
FirstChoiceToolItem | |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | PVD |
CBMD | Z20M |
LBB | 0.047” (1.20 mm) |
AN | 11.0° |
RE | 0.016” (0.40 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.043” (1.10 mm) |
L | 0.222” (5.65 mm) |
APMX | 0.016” (0.40 mm) |
D1 | 0.098” (2.50 mm) |
HAND | |
IC | 0.219” (5.56 mm) |
EPSR | 80.0° |
IIC | CP05T1 |
GAN | 20.0° |
S (insert thickness) | 0.078” (1.97 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |