Description
DX30 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
CDGW 040100 FN DX30
$23.37 ea.
Denitool CDGW 1.2.6 sized neutral carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.015” (0.4 mm). The CDGW 040100 FN DX30 insert has a carbide substrate. It is PVD coated with our DX30 grade. It’s the best choice to cut in steel. It’s the best choice to cut cast iron. It’s well suited to cut non-ferrous materials. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.0007 lbs |
|---|---|
| Dimensions | 2.7 × 1 × 0.4 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | X00G |
| LBB | 0.000” (0.00 mm) |
| AN | 15.0° |
| RE | 0.000” (0.00 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.157” (4.00 mm) |
| L | 0.159” (4.03 mm) |
| APMX | 0.016” (0.40 mm) |
| D1 | 0.087” (2.20 mm) |
| HAND | |
| IC | 0.156” (3.97 mm) |
| EPSR | 80.0° |
| IIC | CD0401 |
| GAN | 0.0° |
| S (insert thickness) | 0.039” (1.00 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |
Related products
-
CDGT 040104 FR DX20
$22.45 ea. Read moreOut of Stock -
CDGW 040104 FN DX30
$19.48 ea. Add to cartIn Stock -
CDGW 040101 FN DX2
$15.12 ea. Read moreOut of Stock
