Description
DX2 Grade
Micrograin grade for machining of cast iron, plastics, and aluminum. Stainless steel at lower cutting speed.
$19.09 ea.
Denitool CDGT 1.2.61 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.02” (0.5 mm). The CDGT 040104 FL DX2 insert has a carbide substrate. It is uncoated. It’s well suited to cut non-ferrous materials. Minimum order quantity: 10 pcs.
Out of stock
Micrograin grade for machining of cast iron, plastics, and aluminum. Stainless steel at lower cutting speed.
Weight | 0.0007 lbs |
---|---|
Dimensions | 2.7 × 1 × 0.4 in |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | uncoated |
CBMD | Z12G |
LBB | 0.020” (0.50 mm) |
AN | 15.0° |
RE | 0.016” (0.40 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.087” (2.22 mm) |
L | 0.159” (4.03 mm) |
APMX | 0.020” (0.50 mm) |
D1 | 0.087” (2.20 mm) |
HAND | |
IC | 0.156” (3.97 mm) |
EPSR | 80.0° |
IIC | CD0401 |
GAN | 12.0° |
S (insert thickness) | 0.039” (1.00 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |