Description
DX20 Grade
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
CDGT 040101 FR DX20
$22.45 ea.
Denitool CDGT 1.2.60.2 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.02” (0.5 mm). The CDGT 040101 FR DX20 insert has a carbide substrate. It is PVD coated with our DX20 grade. It’s well suited to cut in steel. It’s well suited to cut non-ferrous materials. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.0007 lbs |
|---|---|
| Dimensions | 2.7 × 1 × 0.4 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | Z12G |
| LBB | 0.020” (0.50 mm) |
| AN | 15.0° |
| RE | 0.004” (0.10 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.087” (2.22 mm) |
| L | 0.159” (4.03 mm) |
| APMX | 0.020” (0.50 mm) |
| D1 | 0.087” (2.20 mm) |
| HAND | |
| IC | 0.156” (3.97 mm) |
| EPSR | 80.0° |
| IIC | CD0401 |
| GAN | 12.0° |
| S (insert thickness) | 0.039” (1.00 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |
Related products
-
CDGT 040104 FR DX50
$25.28 ea. Read moreOut of Stock -
CDGT 040104 FR DX30
$23.37 ea. Read moreOut of Stock -
CDGT 040104 FL DX20
$22.45 ea. Add to cartIn Stock
