Description
DT355 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
CCGT 09T308 EN DT355
$32.01 ea.
Denitool CCGT 32.52 sized positive cermet turning insert with a honed cutting edge and maximum depth of cut (DOC) of 0.1” (2.5 mm). The CCGT 09T308 EN DT355 insert has a cermet substrate. It is PVD coated with our DT355 grade. It’s the best choice to cut in steel. It’s well suited to cut in stainless steel. Minimum order quantity: 10 pcs.
Out of stock
Additional information
| Weight | 0.011 lbs |
|---|---|
| Dimensions | 4.6 × 2 × 0.5 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | B12H |
| LBB | 0.049” (1.25 mm) |
| AN | 7.0° |
| RE | 0.031” (0.80 mm) |
| REN | 0.031” (0.80 mm) |
| LE | 0.382” (9.70 mm) |
| L | 0.381” (9.67 mm) |
| APMX | 0.098” (2.50 mm) |
| D1 | 0.173” (4.40 mm) |
| HAND | |
| IC | 0.375” (9.52 mm) |
| EPSR | 80.0° |
| IIC | CC09T3 |
| GAN | 12.0° |
| S (insert thickness) | 0.156” (3.97 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa) |
Related products
-
CCGT 09T308 EN DT255
$31.44 ea. Read moreOut of Stock -
CCGT 09T308 FN-250 DX2
$13.80 ea. Add to cartIn Stock -
CCGT 09T308 FN-250 DX20
$15.95 ea. Add to cartIn Stock
