Description
DX30 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
$17.25 ea.
Denitool CCGT 32.51 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.155” (4 mm). The CCGT 09T304 FN-250 DX30 insert has a carbide substrate. It is PVD coated with our DX30 grade. It’s the best choice to cut in stainless steel. It’s the best choice to cut non-ferrous materials. Minimum order quantity: 10 pcs.
In stock
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
Weight | 0.011 lbs |
---|---|
Dimensions | 4.6 × 2 × 0.5 in |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | PVD |
CBMD | A25S |
LBB | 0.000” (0.00 mm) |
AN | 7.0° |
RE | 0.016” (0.40 mm) |
REN | 0.016” (0.40 mm) |
LE | 0.382” (9.70 mm) |
L | 0.381” (9.67 mm) |
APMX | 0.157” (4.00 mm) |
D1 | 0.173” (4.40 mm) |
HAND | |
IC | 0.375” (9.52 mm) |
EPSR | 80.0° |
IIC | CC09T3 |
GAN | 25.0° |
S (insert thickness) | 0.156” (3.97 mm) |
Capability | M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%), N3 – Aluminum Alloys (Si > 12.2%), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |