Description
DT355 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
WCGT 020104 FR DT355
$25.02 ea.
Denitool WCGT 1.211 sized positive cermet turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.015” (0.4 mm). The WCGT 020104 FR DT355 insert has a cermet substrate. It is PVD coated with our DT355 grade. It’s the best choice to cut in steel. It’s well suited to cut non-ferrous materials. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
Out of stock
Additional information
| Weight | 0.0009 lbs |
|---|---|
| Dimensions | 2.7 × 1 × 0.4 in |
| FirstChoiceToolItem | |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | Z12G |
| LBB | 0.024” (0.60 mm) |
| AN | 7.0° |
| RE | 0.016” (0.40 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.104” (2.65 mm) |
| L | 0.107” (2.72 mm) |
| APMX | 0.016” (0.40 mm) |
| D1 | 0.087” (2.20 mm) |
| HAND | |
| IC | 0.156” (3.97 mm) |
| EPSR | 80.0° |
| IIC | WC0201 |
| GAN | 12.0° |
| S (insert thickness) | 0.063” (1.59 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N5 – Carbon – Graphite Composites – CFRP |
Related products
-
WCGT 020104 FR DX20
$27.27 ea. Read moreOut of Stock -
WCGT 020104 FN-20 DX20
$19.65 ea. Add to cartIn Stock -
WCGW 0201005 FN DT55
$24.31 ea. Add to cartIn Stock
