Description
DX2 Grade
Micrograin grade for machining of cast iron, plastics, and aluminum. Stainless steel at lower cutting speed.
WCGT 020104 FL DX2
$23.82 ea.
Denitool WCGT 1.211 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.015” (0.4 mm). The WCGT 020104 FL DX2 insert has a carbide substrate. It is uncoated. It’s well suited to cut cast iron. It’s well suited to cut non-ferrous materials. Minimum order quantity: 10 pcs.
Out of stock
Additional information
| Weight | 0.0009 lbs |
|---|---|
| Dimensions | 2.7 × 1 × 0.4 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | uncoated |
| CBMD | Z12G |
| LBB | 0.024” (0.60 mm) |
| AN | 7.0° |
| RE | 0.016” (0.40 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.104” (2.65 mm) |
| L | 0.107” (2.72 mm) |
| APMX | 0.016” (0.40 mm) |
| D1 | 0.087” (2.20 mm) |
| HAND | |
| IC | 0.156” (3.97 mm) |
| EPSR | 80.0° |
| IIC | WC0201 |
| GAN | 12.0° |
| S (insert thickness) | 0.063” (1.59 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |
Related products
-
WCGT 020104 FN-20 DX2
$16.20 ea. Read moreOut of Stock -
WCGT 020104 FN DT355
$25.02 ea. Read moreOut of Stock -
WCGT 020104 FR DX50
$30.23 ea. Read moreOut of Stock
