Description
DT255 Grade
For steel, free-cutting stainless steel, and superalloys at medium up to high cutting speed.
$22.31 ea.
Denitool WCGT 1.210.5 sized positive cermet turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.015” (0.4 mm). The WCGT 020102 FR DT255 insert has a cermet substrate. It is PVD coated with our DT255 grade. It’s the best choice to cut in steel. It’s well suited to cut non-ferrous materials. Minimum order quantity: 10 pcs.
Out of stock
For steel, free-cutting stainless steel, and superalloys at medium up to high cutting speed.
Weight | 0.0009 lbs |
---|---|
Dimensions | 2.7 × 1 × 0.4 in |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | PVD |
CBMD | Z12G |
LBB | 0.024” (0.60 mm) |
AN | 7.0° |
RE | 0.008” (0.20 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.106” (2.70 mm) |
L | 0.107” (2.72 mm) |
APMX | 0.016” (0.40 mm) |
D1 | 0.087” (2.20 mm) |
HAND | |
IC | 0.156” (3.97 mm) |
EPSR | 80.0° |
IIC | WC0201 |
GAN | 12.0° |
S (insert thickness) | 0.063” (1.59 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N5 – Carbon – Graphite Composites – CFRP |