Description
DX20 Grade
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
$25.36 ea.
Denitool WCET 1.210.2 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.01” (0.2 mm). The WCET 020101 FN-20 DX20 insert has a carbide substrate. It is PVD coated with our DX20 grade. It’s the best choice to cut in steel. It’s well suited to cut in stainless steel. It’s well suited to cut non-ferrous materials. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
In stock
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
Weight | 0.0009 lbs |
---|---|
Dimensions | 2.7 × 1 × 0.4 in |
FirstChoiceToolItem | |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | PVD |
CBMD | Z20G |
LBB | 0.055” (1.40 mm) |
AN | 7.0° |
RE | 0.004” (0.10 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.059” (1.50 mm) |
L | 0.107” (2.72 mm) |
APMX | 0.008” (0.20 mm) |
D1 | 0.087” (2.20 mm) |
HAND | |
IC | 0.156” (3.97 mm) |
EPSR | 80.0° |
IIC | WC0201 |
GAN | 20.0° |
S (insert thickness) | 0.063” (1.59 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%), N3 – Aluminum Alloys (Si > 12.2%), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |