Description
DX70 Grade
The universal grade for aluminum alloys, steel, and superalloys. High thermal stability
$26.93 ea.
Denitool VCGW 110.2 sized neutral carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.01” (0.2 mm). The VCGW 050101 DX70 insert has a carbide substrate. It is PVD coated with our DX70 grade. It’s well suited to cut in steel. It’s the best choice to cut cast iron. It’s well suited to cut non-ferrous materials. Minimum order quantity: 10 pcs.
In stock
The universal grade for aluminum alloys, steel, and superalloys. High thermal stability
Weight | 0.0011 lbs |
---|---|
Dimensions | 2.7 × 1 × 0.4 in |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | PVD |
CBMD | X00G |
LBB | 0.000” (0.00 mm) |
AN | 7.0° |
RE | 0.004” (0.10 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.213” (5.40 mm) |
L | 0.213” (5.41 mm) |
APMX | 0.008” (0.20 mm) |
D1 | 0.067” (1.70 mm) |
HAND | |
IC | 0.122” (3.10 mm) |
EPSR | 35.0° |
IIC | VC0501 |
GAN | 0.0° |
S (insert thickness) | 0.063” (1.59 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |