Description
DX2 Grade
Micrograin grade for machining of cast iron, plastics, and aluminum. Stainless steel at lower cutting speed.
$24.42 ea.
Denitool VCGT 333 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.315” (8 mm). The VCGT 160412 FN-250 DX2 insert has a carbide substrate. It is uncoated. It’s the best choice to cut non-ferrous materials. Minimum order quantity: 10 pcs.
In stock
Micrograin grade for machining of cast iron, plastics, and aluminum. Stainless steel at lower cutting speed.
Weight | 0.0154 lbs |
---|---|
Dimensions | 4.6 × 2 × 0.5 in |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | uncoated |
CBMD | A25S |
LBB | 0.000” (0.00 mm) |
AN | 7.0° |
RE | 0.047” (1.20 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.654” (16.60 mm) |
L | 0.653” (16.60 mm) |
APMX | 0.315” (8.00 mm) |
D1 | 0.173” (4.40 mm) |
HAND | |
IC | 0.375” (9.52 mm) |
EPSR | 35.0° |
IIC | VC1604 |
GAN | 25.0° |
S (insert thickness) | 0.187” (4.76 mm) |
Capability | N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |