VCGT 130304 FN-18M STC

Name: VCGT 130304 FN-18M STC
SKU: VCGT 130304 FN-18M STC
Price: 32.04 USD
Availability: InStock

$32.04 ea.

Denitool VCGT 2.521 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.155” (4 mm). The VCGT 130304 FN-18M STC insert has a carbide substrate. It is PVD+C-amorph coated with our STC grade. It’s the best choice to cut in steel. It’s the best choice to cut in stainless steel. It’s the best choice to cut non-ferrous materials. It’s the best choice to cut super alloys. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 1 pcs.

In stock

SKU: VCGT 130304 FN-18M STC Category: VCGT 1303.. EN-18M/FN-18M Tag: VC1303

Description
Product Data

Description

STC Grade

For stainless steels, superalloys, titanium & aluminum. Wear-resistant multi-layer high-performance coating for high thermal insulation, hardness, against cold welding and smearing.

Additional information

Weight	0.011 lbs
Dimensions	4.6 × 2 × 0.5 in
FirstChoiceToolItem	first choice
ANSI SIZE	VCGT 2.521
SUBSTRATE	Carbide
Grade	STC
COATING	PVD+C-amorph
CBMD	B18M
LBB	0.047” (1.20 mm)
AN	7.0°
RE	0.016” (0.40 mm)
REN	0.000” (0.00 mm)
LE	0.319” (8.10 mm)
L	0.545” (13.84 mm)
APMX	0.157” (4.00 mm)
D1	0.134” (3.40 mm)
HAND	neutral
IC	0.313” (7.94 mm)
EPSR	35.0°
IIC	VC1303
GAN	18.0°
S (insert thickness)	0.125” (3.18 mm)
Capability	P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%), N3 – Aluminum Alloys (Si > 12.2%), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP, S1 – Iron-Based – Heat-Resistant Alloys (Rm 500-1200 MPa – Hardness 160-260 HB / 25-48 HRC), S2 – Cobalt-Based – Heat-Resistant Alloys (Rm 1000-1450 MPa – Hardness 250-450 HB / 25-48 HRC), S3 – Nickel-Based – Heat-Resistant Alloys (Rm 600-1700 MPa – Hardness 160-450 HB / < 48 HRC), S4 – Titanium and Titanium-based Alloys (Rm 900-1600 MPa – Hardness 300-400 HB / 33-48 HRC)

VCGT 130304 FN-18M STC

Description

STC Grade

Additional information

Related products

VCGW 130308 DX20

VCGW 130308 CBN

VCGW 130308 DX50