Description
DX2 Grade
Micrograin grade for machining of cast iron, plastics, and aluminum. Stainless steel at lower cutting speed.
$22.91 ea.
Denitool VCGT 2.521 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.195” (5 mm). The VCGT 130304 FL-10 DX2 insert has a carbide substrate. It is uncoated. It’s well suited to cut in steel. It’s well suited to cut non-ferrous materials. Minimum order quantity: 10 pcs.
Out of stock
Micrograin grade for machining of cast iron, plastics, and aluminum. Stainless steel at lower cutting speed.
Weight | 0.011 lbs |
---|---|
Dimensions | 4.6 × 2 × 0.5 in |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | uncoated |
CBMD | Z12G |
LBB | 0.039” (1.00 mm) |
AN | 7.0° |
RE | 0.016” (0.40 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.512” (13.00 mm) |
L | 0.545” (13.84 mm) |
APMX | 0.197” (5.00 mm) |
D1 | 0.134” (3.40 mm) |
HAND | |
IC | 0.313” (7.94 mm) |
EPSR | 35.0° |
IIC | VC1303 |
GAN | 12.0° |
S (insert thickness) | 0.125” (3.18 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), N1 – Copper Alloys (Rm 450-650 MPa), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |