Description
DX32 Grade
The universal grade for light metal alloys and stainless steel. High protection against edge build-up.
$25.13 ea.
Denitool VCGT 2.520.2 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.195” (5 mm). The VCGT 130301 FR-01W DX32 insert has a carbide substrate. It is PVD+PLC coated with our DX32 grade. It’s the best choice to cut in steel. It’s the best choice to cut in stainless steel. It’s well suited to cut non-ferrous materials. Minimum order quantity: 10 pcs.
In stock
The universal grade for light metal alloys and stainless steel. High protection against edge build-up.
Weight | 0.011 lbs |
---|---|
Dimensions | 4.6 × 2 × 0.5 in |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | PVD+PLC |
CBMD | B20MW |
LBB | 0.043” (1.10 mm) |
AN | 7.0° |
RE | 0.004” (0.10 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.465” (11.80 mm) |
L | 0.545” (13.84 mm) |
APMX | 0.197” (5.00 mm) |
D1 | 0.134” (3.40 mm) |
HAND | |
IC | 0.313” (7.94 mm) |
EPSR | 35.0° |
IIC | VC1303 |
GAN | 20.0° |
S (insert thickness) | 0.125” (3.18 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%) |