Description
DX20 Grade
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
VCGT 130301-25 DX20
$24.18 ea.
Denitool VCGT 2.520.2 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.235” (6 mm). The VCGT 130301-25 DX20 insert has a carbide substrate. It is PVD coated with our DX20 grade. It’s the best choice to cut non-ferrous materials. Minimum order quantity: 10 pcs.
Out of stock
Additional information
| Weight | 0.011 lbs |
|---|---|
| Dimensions | 4.6 × 2 × 0.5 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | C25S |
| LBB | 0.000” (0.00 mm) |
| AN | 7.0° |
| RE | 0.004” (0.10 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.528” (13.40 mm) |
| L | 0.545” (13.84 mm) |
| APMX | 0.236” (6.00 mm) |
| D1 | 0.134” (3.40 mm) |
| HAND | |
| IC | 0.313” (7.94 mm) |
| EPSR | 35.0° |
| IIC | VC1303 |
| GAN | 25.0° |
| S (insert thickness) | 0.125” (3.18 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%), N3 – Aluminum Alloys (Si > 12.2%), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |
Related products
-
VCGW 130302 DX2
$20.27 ea. Add to cartIn Stock -
VCGW 130308 DX50
$31.14 ea. Read moreOut of Stock -
VCGW 130300 FR DX30
$30.89 ea. Read moreOut of Stock
