Description
DX20 Grade
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
VCGT 110304 FN-250 DX20
$21.87 ea.
Denitool VCGT 221 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.235” (6 mm). The VCGT 110304 FN-250 DX20 insert has a carbide substrate. It is PVD coated with our DX20 grade. It’s well suited to cut in stainless steel. It’s the best choice to cut non-ferrous materials. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.0066 lbs |
|---|---|
| Dimensions | 3.5 × 1.5 × 0.4 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | A25S |
| LBB | 0.000” (0.00 mm) |
| AN | 7.0° |
| RE | 0.016” (0.40 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.437” (11.10 mm) |
| L | 0.436” (11.07 mm) |
| APMX | 0.236” (6.00 mm) |
| D1 | 0.110” (2.80 mm) |
| HAND | |
| IC | 0.250” (6.35 mm) |
| EPSR | 35.0° |
| IIC | VC1103 |
| GAN | 25.0° |
| S (insert thickness) | 0.125” (3.18 mm) |
| Capability | M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%), N3 – Aluminum Alloys (Si > 12.2%), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |
Related products
-
VCGT 110308 FN-250 DX2
$18.73 ea. Add to cartIn Stock -
VCGT 110302 FN-250 DX20
$21.87 ea. Read moreOut of Stock -
VCGT 110304 FN-18M DX2
$17.23 ea. Add to cartIn Stock
