Description
DX20 Grade
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
$30.29 ea.
Denitool VCGT 1.21.5 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.12” (3 mm). The VCGT 070200-08 FR DX20 insert has a carbide substrate. It is PVD coated with our DX20 grade. It’s well suited to cut in steel. It’s well suited to cut non-ferrous materials. Minimum order quantity: 10 pcs.
Out of stock
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
Weight | 0.0022 lbs |
---|---|
Dimensions | 2.7 × 1 × 0.4 in |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | PVD |
CBMD | Z12GW |
LBB | 0.024” (0.60 mm) |
AN | 7.0° |
RE | 0.000” (0.00 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.220” (5.60 mm) |
L | 0.272” (6.92 mm) |
APMX | 0.118” (3.00 mm) |
D1 | 0.091” (2.30 mm) |
HAND | |
IC | 0.156” (3.97 mm) |
EPSR | 35.0° |
IIC | VC0702 |
GAN | 12.0° |
S (insert thickness) | 0.094” (2.38 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%), N3 – Aluminum Alloys (Si > 12.2%), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP |