Description
DX2 Grade
Micrograin grade for machining of cast iron, plastics, and aluminum. Stainless steel at lower cutting speed.
TPMW 16T308 FN DX2
$12.07 ea.
Denitool TPMW 32.52 sized neutral carbide turning and milling insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.275” (7 mm). The TPMW 16T308 FN DX2 insert has a carbide substrate. It is uncoated. It’s the best choice to cut cast iron. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.0132 lbs |
|---|---|
| Dimensions | 4.6 × 2 × 0.5 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | uncoated |
| CBMD | X00G |
| LBB | 0.000” (0.00 mm) |
| AN | 11.0° |
| RE | 0.031” (0.80 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.650” (16.50 mm) |
| L | 0.649” (16.49 mm) |
| APMX | 0.276” (7.00 mm) |
| D1 | 0.173” (4.40 mm) |
| HAND | |
| IC | 0.375” (9.52 mm) |
| EPSR | 60.0° |
| IIC | TP16T3 |
| GAN | 0.0° |
| S (insert thickness) | 0.156” (3.97 mm) |
| Capability | K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa) |
