Description
DP55 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at high cutting speed. High thermal stability. Excellent for dry machining.
TPHW 110204 EN DP55
$29.98 ea.
Denitool TPHW 21.51 sized neutral carbide turning and milling insert with a honed cutting edge and maximum depth of cut (DOC) of 0.12” (3 mm). The TPHW 110204 EN DP55 insert has a carbide substrate. It is PVD coated with our DP55 grade. It’s the best choice to cut in steel. Minimum order quantity: 10 pcs.
Out of stock
Additional information
| Weight | 0.0044 lbs |
|---|---|
| Dimensions | 3.5 × 1.5 × 0.4 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | X00H |
| LBB | 0.000” (0.00 mm) |
| AN | 11.0° |
| RE | 0.016” (0.40 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.433” (11.00 mm) |
| L | 0.433” (11.00 mm) |
| APMX | 0.118” (3.00 mm) |
| D1 | 0.110” (2.80 mm) |
| HAND | |
| IC | 0.250” (6.35 mm) |
| EPSR | 60.0° |
| IIC | TP1102 |
| GAN | 0.0° |
| S (insert thickness) | 0.094” (2.38 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa) |
Related products
-
TPHW 110202 EN DP55
$29.98 ea. Add to cartIn Stock -
TPHW 110204 FN DX2
$20.04 ea. Read moreOut of Stock -
TPHW 110202 FN DX50
$29.98 ea. Add to cartIn Stock
