Description
DP55 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at high cutting speed. High thermal stability. Excellent for dry machining.
TPHT 110202 EL DP55
$31.02 ea.
Denitool TPHT 21.50.5 sized positive carbide turning insert with a honed cutting edge and maximum depth of cut (DOC) of 0.12” (3 mm). The TPHT 110202 EL DP55 insert has a carbide substrate. It is PVD coated with our DP55 grade. It’s the best choice to cut in steel. It’s well suited to cut super alloys. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
Out of stock
Additional information
| Weight | 0.0044 lbs |
|---|---|
| Dimensions | 3.5 × 1.5 × 0.4 in |
| FirstChoiceToolItem | |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | Z15H |
| LBB | 0.067” (1.70 mm) |
| AN | 11.0° |
| RE | 0.008” (0.20 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.280” (7.10 mm) |
| L | 0.433” (11.00 mm) |
| APMX | 0.118” (3.00 mm) |
| D1 | 0.110” (2.80 mm) |
| HAND | |
| IC | 0.250” (6.35 mm) |
| EPSR | 60.0° |
| IIC | TP1102 |
| GAN | 15.0° |
| S (insert thickness) | 0.094” (2.38 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), S1 – Iron-Based – Heat-Resistant Alloys (Rm 500-1200 MPa – Hardness 160-260 HB / 25-48 HRC), S2 – Cobalt-Based – Heat-Resistant Alloys (Rm 1000-1450 MPa – Hardness 250-450 HB / 25-48 HRC), S3 – Nickel-Based – Heat-Resistant Alloys (Rm 600-1700 MPa – Hardness 160-450 HB / < 48 HRC), S4 – Titanium and Titanium-based Alloys (Rm 900-1600 MPa – Hardness 300-400 HB / 33-48 HRC) |
Related products
-
TPHT 110208 ER P25
$21.77 ea. Add to cartIn Stock -
TPHT 110208 ER DP55
$31.02 ea. Read moreOut of Stock -
TPHT 110208 ER DP25
$25.14 ea. Add to cartOn Demand
