Description
DP25 Grade
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
$25.14 ea.
Denitool TPHT 21.50.5 sized positive carbide turning insert with a honed cutting edge and maximum depth of cut (DOC) of 0.12” (3 mm). The TPHT 110202 EL DP25 insert has a carbide substrate. It is PVD coated with our DP25 grade. It’s the best choice to cut in steel. It’s well suited to cut in stainless steel. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
Out of stock
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
Weight | 0.0044 lbs |
---|---|
Dimensions | 3.5 × 1.5 × 0.4 in |
FirstChoiceToolItem | |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | PVD |
CBMD | Z15H |
LBB | 0.067” (1.70 mm) |
AN | 11.0° |
RE | 0.008” (0.20 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.280” (7.10 mm) |
L | 0.433” (11.00 mm) |
APMX | 0.118” (3.00 mm) |
D1 | 0.110” (2.80 mm) |
HAND | |
IC | 0.250” (6.35 mm) |
EPSR | 60.0° |
IIC | TP1102 |
GAN | 15.0° |
S (insert thickness) | 0.094” (2.38 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa) |