Description
DP25 Grade
For steel, free-cutting stainless steel and superalloys at medium cutting speed.
TPGT 16T304 EN DP25
$20.32 ea.
Denitool TPGT 32.51 sized positive carbide turning and milling insert with a honed cutting edge and maximum depth of cut (DOC) of 0.155” (4 mm). The TPGT 16T304 EN DP25 insert has a carbide substrate. It is PVD coated with our DP25 grade. It’s the best choice to cut in steel. It’s also the first choice to use, before considering other inserts. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.0132 lbs |
|---|---|
| Dimensions | 4.6 × 2 × 0.5 in |
| FirstChoiceToolItem | |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | B15H |
| LBB | 0.079” (2.00 mm) |
| AN | 11.0° |
| RE | 0.016” (0.40 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.650” (16.50 mm) |
| L | 0.649” (16.49 mm) |
| APMX | 0.157” (4.00 mm) |
| D1 | 0.173” (4.40 mm) |
| HAND | |
| IC | 0.375” (9.52 mm) |
| EPSR | 60.0° |
| IIC | TP16T3 |
| GAN | 15.0° |
| S (insert thickness) | 0.156” (3.97 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa) |
Related products
-
TPHW 16T308 FN DX50
$33.92 ea. Read moreOut of Stock -
TPHW 16T308 FN DX20
$27.20 ea. Read moreOut of Stock -
TPHW 16T308 FN DX2
$22.77 ea. Add to cartIn Stock
