Name: TPGT 16T304-25 DX52
SKU: TPGT 16T304-25 DX52
Price: 31.67 USD
Availability: OutOfStock

TPGT 16T304-25 DX52

$31.67 ea.

Denitool TPGT 32.51 sized positive carbide turning and milling insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.395” (10 mm). The TPGT 16T304-25 DX52 insert has a carbide substrate. It is PVD+PLC coated with our DX52 grade. It’s the best choice to cut in stainless steel. It’s the best choice to cut non-ferrous materials. It’s well suited to cut super alloys. Minimum order quantity: 10 pcs.

Out of stock

SKU: TPGT 16T304-25 DX52 Category: TPGT 16T3..-25 Tag: TP16T3

Description

DX52 Grade

Similar to DX 50 but with additional PLC-antifriction film against the cold-welding tendency. High thermal stability.

Additional information

Weight	0.0132 lbs
Dimensions	4.6 × 2 × 0.5 in
ANSI SIZE	TPGT 32.51
SUBSTRATE	Carbide
Grade	DX52
COATING	PVD+PLC
CBMD	C20S
LBB	0.000” (0.00 mm)
AN	11.0°
RE	0.016” (0.40 mm)
REN	0.000” (0.00 mm)
LE	0.650” (16.50 mm)
L	0.649” (16.49 mm)
APMX	0.394” (10.00 mm)
D1	0.173” (4.40 mm)
HAND	neutral
IC	0.375” (9.52 mm)
EPSR	60.0°
IIC	TP16T3
GAN	20.0°
S (insert thickness)	0.156” (3.97 mm)
Capability	M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%), N3 – Aluminum Alloys (Si > 12.2%), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP, S1 – Iron-Based – Heat-Resistant Alloys (Rm 500-1200 MPa – Hardness 160-260 HB / 25-48 HRC), S2 – Cobalt-Based – Heat-Resistant Alloys (Rm 1000-1450 MPa – Hardness 250-450 HB / 25-48 HRC), S3 – Nickel-Based – Heat-Resistant Alloys (Rm 600-1700 MPa – Hardness 160-450 HB / < 48 HRC), S4 – Titanium and Titanium-based Alloys (Rm 900-1600 MPa – Hardness 300-400 HB / 33-48 HRC)

TPGT 16T304-25 DX52

Description

DX52 Grade

Additional information

Related products

TPHW 16T308 FN DX50

TPHW 16T308 FN DX20

TPHW 16T308 SN P25