Description
DT55 Grade
For finishing applications in steel and free-cutting stainless steel at medium cutting speed.
$19.74 ea.
Denitool EPGT 1.81.51 sized positive cermet turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.1” (2.5 mm). The EPGT 050204 FL DT55 insert has a cermet substrate. It is uncoated. It’s the best choice to cut in steel. It’s well suited to cut cast iron. Minimum order quantity: 10 pcs.
In stock
For finishing applications in steel and free-cutting stainless steel at medium cutting speed.
Weight | 0.0022 lbs |
---|---|
Dimensions | 3.5 × 1.5 × 0.4 in |
ANSI SIZE | |
SUBSTRATE | |
Grade | |
COATING | uncoated |
CBMD | Z12G |
LBB | 0.026” (0.65 mm) |
AN | 11.0° |
RE | 0.016” (0.40 mm) |
REN | 0.000” (0.00 mm) |
LE | 0.185” (4.70 mm) |
L | 0.227” (5.76 mm) |
APMX | 0.098” (2.50 mm) |
D1 | 0.098” (2.50 mm) |
HAND | |
IC | 0.219” (5.56 mm) |
EPSR | 75.0° |
IIC | EP0502 |
GAN | 12.0° |
S (insert thickness) | 0.094” (2.38 mm) |
Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N5 – Carbon – Graphite Composites – CFRP |