Description
DT355 Grade
For steel, difficult to machine stainless steel, gray and nodular cast iron at medium up to high cutting speed. Excellent wear resistance.
EPGT 050202 FL DT355
$24.06 ea.
Denitool EPGT 1.81.50.5 sized positive cermet turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.1” (2.5 mm). The EPGT 050202 FL DT355 insert has a cermet substrate. It is PVD coated with our DT355 grade. It’s the best choice to cut in steel. It’s well suited to cut in stainless steel. It’s well suited to cut cast iron. Minimum order quantity: 10 pcs.
Out of stock
Additional information
| Weight | 0.0022 lbs |
|---|---|
| Dimensions | 3.5 × 1.5 × 0.4 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | PVD |
| CBMD | Z12G |
| LBB | 0.026” (0.65 mm) |
| AN | 11.0° |
| RE | 0.008” (0.20 mm) |
| REN | 0.000” (0.00 mm) |
| LE | 0.177” (4.50 mm) |
| L | 0.227” (5.76 mm) |
| APMX | 0.098” (2.50 mm) |
| D1 | 0.098” (2.50 mm) |
| HAND | |
| IC | 0.219” (5.56 mm) |
| EPSR | 75.0° |
| IIC | EP0502 |
| GAN | 12.0° |
| S (insert thickness) | 0.094” (2.38 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), P2 – Alloy Steel (Rm 500-700 MPa – Hardness 140-200 HB – C-Content > 0.25%), P3 – Tool Steel (Rm 900-1100 MPa – Hardness 170-275 HB – C-Content > 0.25%), P4 – Alloy Tool Steel (Rm 700-900 MPa), P5 – Alloy Cast Steel (Rm 800-1500 MPa), M1 – Stainless Steel (Rm < 800 MPa), M2 – Stainless Steel – austenitic – martensitic (Rm 500-1100 MPa), K1 – Grey Cast Iron (Rm < 250 MPa), K2 – Cast Iron Malleable (Rm 250-350 MPa), N1 – Copper Alloys (Rm 450-650 MPa), N5 – Carbon – Graphite Composites – CFRP |
Related products
-
EPGT 050204 FR-10 DX20
$21.26 ea. Read moreOut of Stock -
EPGT 050204 FR DT255
$23.06 ea. Read moreOut of Stock -
EPGT 050204 FR-10 DX30
$22.66 ea. Read moreOut of Stock
