Description
DX2 Grade
Micrograin grade for machining of cast iron, plastics, and aluminum. Stainless steel at lower cutting speed.
DCGT 11T304-15 DX2
$16.10 ea.
Denitool DCGT 32.51 sized positive carbide turning insert with a sharp cutting edge and maximum depth of cut (DOC) of 0.155” (4 mm). The DCGT 11T304-15 DX2 insert has a carbide substrate. It is uncoated. It’s well suited to cut non-ferrous materials. Minimum order quantity: 10 pcs.
In stock
Additional information
| Weight | 0.011 lbs |
|---|---|
| Dimensions | 4.6 × 2 × 0.5 in |
| ANSI SIZE | |
| SUBSTRATE | |
| Grade | |
| COATING | uncoated |
| CBMD | B15M |
| LBB | 0.067” (1.70 mm) |
| AN | 7.0° |
| RE | 0.016” (0.40 mm) |
| REN | 0.016” (0.40 mm) |
| LE | 0.457” (11.60 mm) |
| L | 0.458” (11.62 mm) |
| APMX | 0.157” (4.00 mm) |
| D1 | 0.173” (4.40 mm) |
| HAND | |
| IC | 0.375” (9.52 mm) |
| EPSR | 55.0° |
| IIC | DC11T3 |
| GAN | 15.0° |
| S (insert thickness) | 0.156” (3.97 mm) |
| Capability | P1 – Low Carbon Steel (Rm < 500 MPa – Hardness 0.25%), N1 – Copper Alloys (Rm 450-650 MPa), N2 – Aluminum and Magnesium Alloys (Si < 12.2%), N4 – Nylon – Plastics – Rubbers – Phenolics – Resins – Fibreglass, N5 – Carbon – Graphite Composites – CFRP, S4 – Titanium and Titanium-based Alloys (Rm 900-1600 MPa – Hardness 300-400 HB / 33-48 HRC) |
Related products
-
DCGT 11T308 EN DT355
$33.04 ea. Add to cartIn Stock -
DCGT 11T308 EN DT55
$27.28 ea. Add to cartIn Stock -
DCGT 11T308 FN-250 DX20
$18.51 ea. Read moreOut of Stock
